You fire up the Boot Camp Assistant app from within macOS, point it at the Windows. Boot Camp is the Apple-endorsed way of getting Windows onto your Mac. Here, then, for anyone considering running Windows 10 on a Mac, is an explanation of the three different ways to run Windows and why you might, or might not, want to do each.I installed a Sapphire Radeon 5700 XT Nitro+ in a Razer Core X. I am using a Mac Mini 2018 running the latest public MacOS, and partitioned the internal disk for bootcamp, running Windows 10 18362.295. If this option did not work for you, please see the Switch with Restart.Hi, this is my first try at using an eGPU.
Bootcamp Not Run Windows 10 On AI have tried restarting almost 15 times to the same result.Despite not being supported. Now it just hangs there indefinitely in a state of loop. I powered on the pc this morning and it goes to the Windows black screen with blue logo and continues to the black screen with circle dots. During my attempts, I needed to connect a second hdmi cable from the mac mini itself to a second hdmi input to see the desktop.I have been running Windows 10 through a Mac Mini Bootcamp partition for the past 3 years. My issue is figuring out how to get windows to recognize my gpu. This setup is recognized by MacOS just fine. Osx media playerJust the sound.I do want to note that I have not manually installed any video drivers. But I don't see any prompts or pop ups or anything like that. When I do connect the egpu tb3 cable I do hear the chime that hardware has been connected, and hear the chime when it is disconnected. I then tried to boot into windows first and then plug in the egpu, and switching from the mac mini hdmi signal to the egpu signal. IMPORTANT: Unplug all external and physical.I tried having the egpu connected from a cold boot and eventually read here that's no good (flickering screen, cutting in and out, hanging on the windows logo). ![]() In these scenarios, I need to restart again, and use the hdmi out on the Mac Mini to get back to MacOS.As a variable unique to me, I am trying to figure out if there is a handshake issue with my monitor (BenQ EW3270U 4k 60hz). I need to restart the PC.If I am on Windows and simply restart, I get the 'no signal' error to the monitor. At this point, even switching connection to the mac mini hdmi out doesn't get a signal. I can hear the Windows system sounds that seem to suggest everything should be OK. For those in a similar situation - So far, the only sure way to boot into Windows 10 is to be in MacOS with the eGPU connected, and then bootcamp restart into Windows.If I last shut down on Windows, and attempt to boot with the eGPU attached, I get 'no signal' error.If I last shut down on Windows, if I boot to desktop without the eGPU and then plug in the eGPU once the desktop has loaded, still no signal. I haven’t tried the automate-eGPU EFI that was suggested to me because I wasn’t sure how to get that to work. Exciting times!By the way, this is still the only reliable way for me to get to Windows, but I’ve learned to be ok with it. I will continue to try different combinations to see if anything works besides the restart from MacOS to you’re welcome! I remember the first time it finally worked for me and it was time to play games. I trie d using an HDMI cable instead of Display Port, but it behaves the same. ![]() Well worth it though! Have fun. Just a bit annoying when that happens.So I just repeat this process going between windows and MacOS. When I was careless and it updated before, I was able to roll back the drivers and be OK.
0 Comments
Leave a Reply. |
AuthorFirstborn ArchivesCategories |